Rastree la acumulación de unidades de calor automáticamente usando su ubicación y datos climáticos en vivo. Ingrese su cultivo y fecha de siembra — la calculadora obtiene las temperaturas diarias reales y completa los GDDs cada vez que regresa al sitio. Realice seguimiento de múltiples siembras simultáneamente.
This calculator uses the USDA Modified method:
GDD = ((min(High, Ceiling) + max(Low, Base)) ÷ 2) − Base
This averages the adjusted daily high and low before subtracting the base temperature,
rather than using the high alone. It accounts for nighttime temperatures — crops accumulate
heat 24 hours a day, not just during the warmest part of the afternoon. The ceiling cap
(86°F for corn) prevents overstating development on very hot days, since growth rate
plateaus above that threshold. This is the standard method used by
Iowa State, Purdue, Kansas State, and WSU Extension for corn and most row crops.
Air temperature vs. soil temperature: GDDs are calculated from air temperature measured at 2 metres above the ground — the standard for all weather stations and agronomic models. However, early-season crop development (germination, emergence, and the first vegetative stages) is driven primarily by soil temperature at seed depth (typically 2 inches / 5 cm), which can differ significantly from air temperature. In spring, dark soils in direct sun can warm 5–15°F above air temperature during the day, meaning the crop may develop faster than air-temp GDDs suggest. Conversely, on cold clear nights soil at seed depth retains heat longer than the air above it. The practical result: GDD-calculated stages often lag visible field stages in early spring, especially in dark irrigated soils like those in the Columbia Basin. The manual stage override (✏️) lets you correct for this by anchoring the projection to what you actually observe in the field.
Automatic GDD accumulation from planting date · weather-powered · persists across visits · worldwide coverage
Un grado-día de crecimiento (GDD), también llamado unidad de calor, es una medida de acumulación de calor usada para predecir el desarrollo de las plantas. Se calcula como el promedio de las temperaturas máxima y mínima diarias menos una temperatura base (10°C para maíz, usando 30°C como techo). Las plantas se desarrollan más rápido con temperaturas altas y más lento con temperaturas frías.
Para maíz, la temperatura base es 10°C (50°F) y el techo es 30°C (86°F) usando el Método Modificado del USDA. Esto significa que las temperaturas por encima de 30°C se limitan a 30°C en el cálculo. Otras culturas usan temperaturas base diferentes: trigo usa 0°C (32°F), soja usa 10°C (50°F).
El maíz de campo típico necesita aproximadamente 1.135 GDDs (base 10°C, techo 30°C) para alcanzar VT/R1 (espigamiento/floración). Hitos importantes: VE (emergencia) = 120 GDDs, V6 = 475 GDDs, VT/R1 = 1.135 GDDs, R3 (grano lechoso) = 1.400 GDDs, madurez fisiológica (R6) = 2.700 GDDs.
El trigo de invierno típicamente necesita 1.500–2.000 GDDs (base 0°C) desde la emergencia hasta la madurez. El trigo de primavera puede necesitar menos GDDs dependiendo de la variedad y región.
El rastreador usa la API Open-Meteo (datos climáticos históricos del ECMWF) para obtener temperaturas máximas y mínimas diarias para las coordenadas de su ubicación. Los datos se completan automáticamente para todos los días desde la fecha de siembra hasta ayer. En visitas de retorno, solo se agregan los días nuevos — sin necesidad de ingresar datos manualmente.